Custom foam inserts

Every tool
gets a home.

Pick your box, add your tools and we CNC-cut a foam insert that fits them. Open the lid and you see straight away what’s missing, before you leave site.

  • Sizes from the makers’ own specs
  • Every design checked by a person before we cut
  • Free design, you get a quote
Diagram: a cutter traces each tool's outline in a sheet of foam, and each pocket drops in at its own depth: impact driver, pliers, spanners, screwdriver and sockets.
Fits the gear you run
  • Milwaukee PACKOUT
  • DeWalt TSTAK & ToughSystem
  • Makita MAKPAC
  • Bosch L-BOXX
  • Festool Systainer
  • Pelican
  • Tool chest drawers
  • Any box enter your size
450+exact tool models, sized from the makers’ specs
36cases, boxes and drawers ready to pick
60+ready-made sets, from sockets to screwdrivers
1.5mmaround each tool: snug, never tight

How it works

Three steps. About five minutes.

No CAD and no measuring every spanner. Pick from real tools and we lay them out for you. Drag anything you want somewhere else.

Diagram: a tool box, a carry case and a drawer unit, each picked in turn with its inside size.

Pick your box

Choose your case or drawer by brand. If it isn’t listed, type in the inside size.

The online designer showing tools being arranged in a foam layout.

Add your tools

Add whole sets at once, like 3/8″ sockets 8–19 or your impact driver with its battery. We arrange them, add finger scoops and engrave the sizes.

Diagram: the cut foam sheets, tools in their pockets, settling into the case.

We cut it

Send it through and we check the design, send you a quote, then cut it on the CNC and ship it to your door.

Examples

Made for how you actually work.

Getting the size right.

We check it before we cut. A person looks over every design and every tool size. If something looks off, we ask you before the cutter touches the foam.

MeasuredWe measured a real one.

Calipers or a photo on A4 in our workshop. The most exact.

TracedThe real outline, from the maker’s photo.

Checked against two published sizes before we use it.

Maker sizeThe published size, confirmed twice.

Two separate sources agree. The outline is a typical shape at that size.

TypicalA common size: check yours.

Fine for most tools. Enter your own length and width if you want it exact.

The foam

Cut to suit the job.

Cut-away diagram of a foam insert: two pockets with straight walls, a tool resting on a solid foam floor, and a second sheet of foam stacked underneath.
  1. Straight, clean walls. Every pocket is cut by CNC, so the sides are square and the edges crisp.
  2. A solid floor under every tool. At least 5 mm of foam stays under each pocket. Tools never sit on the bare case.
  3. Strong walls between tools. At least 4 mm of foam between pockets, so there are no thin flaps to tear.
  4. Snug, not tight. 1.5 mm around each tool: it stays put in the van and still lifts out with gloves on.
  5. Sheets that stack. Deep boxes get several layers, and a layer can be split into trays you lift out on their own.

Dense closed-cell foam. We cut cross-linked polyethylene, the foam made for tool inserts: firm, holds a crisp edge, and doesn’t soak up oil or water. Two-colour on request: a bright base layer under the top colour, so an empty pocket stands out the moment you open the lid.

20–100 mm

Seven foam thicknesses, with multiple layers for deep boxes and drawers.

7 colours
Finger scoops

Lift every tool out with gloves on. Sets share one long scoop.

Engraved sizes

Size labels cut into the foam beside each pocket, or your own text.

Questions

Good to know.

Do I need to measure my tools?

Usually not. Pick your exact model from the list and we use the maker’s own size. If a tool isn’t listed, add it by length and width, or lay it on A4 paper and send a photo.

What if my case isn’t listed?

Choose “Any box” and type in the inside length, width and depth. Measure inside the walls, at the bottom.

Can I stack more than one layer?

Yes. Deep boxes take several sheets, each cut for its own tools, and a sheet can be split into trays you lift out on their own.

What does it cost?

Designing is free. Send your design through and we check it and reply with a quote. You only pay once you’re happy with it.

Will my tools fall out in the van?

No. Each pocket is cut 1.5 mm bigger than the tool all round, so it holds firm, and a finger scoop lets you lift it out with gloves on.

What foam do you use?

Dense closed-cell cross-linked polyethylene. It’s firm, holds a crisp edge and doesn’t soak up oil or water. Seven colours, and two-colour on request.

Sort your box out.

Designing is free and takes a few minutes. You only pay once you’re happy with the quote.

Design your insert